"Duck, Duck, Jeep" first started in Ontario back in 2020 during COVID. All it took was for one Jeep owner, named Allison Parliament, to decide that she wanted to make another Jeep owner's day. So, she placed a yellow rubber duck, with a note, on the parked Jeep that she spotted. The intent was to bring a smile to a fellow Jeep owner and to spread a little cheer that people desperately needed during the pandemic.
Since the recipient did, in fact, think it was funny, Parliament and her friends decided to continue with the idea. They began "ducking" other Jeeps and also spreading the word through Facebook and Instagram. The trend took off like wildfire! The trend has spread throughout Canada, all 50 states, and even countries like Spain and Australia. It just shows how easy it is to get on board with a simple act of kindness!
We carry on this trend by making it safer for the ducks and the driver. Our duck holders get your ducks in a row and prevents them from flying all over the place on trails or on the highway. We all love the winding roads and trails!
Show off those ducks! With or without sticky tape!
Do you have ducks on your dash that go flying every time you take a turn? Have you lost a couple because you wanted to have your doors off? Then you need the Puzzled duck holder! Simple and convenient, this holder snaps together to give you more posts to put your ducks on as you need more .
Made of durable PETG plastic that can handle the hottest dash, these holders measure 12 inches long and 1 1/4 inch wide. Holding 5 ducks neatly in place, feel free to go offroading knowing you will come home with more ducks than you left with! The posts are the perfect size for the hole in the bottom of most ducks and made of smooth tubing that are pressed into the holes of the holder. These are pre-installed to keep things easy. And now Black!
Lastly, Every holder comes with the mounting tape needed to keep them where you tell them to be. Just do a quick wipe down of the dash, peel off the film and stick!
Our mounting tape is clear so you don't see it and also REMOVABLE so you can be sure that it is mark and RESIDUE FREE.
We stand behind everything we make so if you aren't satisfied with your purchase, just let us know and we will make it right.
If you would prefer to not use sticky tape for these, NO PROBLEM! Check our other products to get our Duck Holder Clip for your Jeep body type. Simply check the photo that says "What does my dash look like?" on the listings and get the one that matches! We also have extensions to make your holder longer if you need to!
Happy Ducking!
Let us make this really easy, everything that you need to get your ducks in a row WITHOUT sticky tape! Our duck holders come in black. Just pick your year of wrangler and pick your color. Our duck holders are extendable as well! Just check out our extensions. If you want to get our duck holder or clips separately you can do that too! Simply click on the listings below.
All of our products are tested and double checked for quality. All of our duck holder products are made with Petg material so they last.
Clips must be used on either the right or left side of the dash. Using them near the center console will result on the clip not grabbing properly resulting in the duck holder becoming loose or the clip and /or duck holder deforming due to high heat exposure.
Our kit includes (1) puzzled duck holder and (1) clip of your choice.
Thank you for supporting small and we hope to help you get your ducks in a row soon!
Here it is, the puzzled duck holder clip. The solution to keeping your ducks in a row WITHOUT sticky tape. Designed to utilize the center post on our duck holders. Simply squeeze the 2 long sides together gently and clip onto the defrost vent. This design maintains full function of the defrost vents.
Once your favorite duck is on the center post the duck holder is locked into the clip. Please note that the duck holder will move slightly from time to time but it isn't going anywhere.
It is important to know that this is designed to fit defrost vents for Late 2018 - present ONLY. This includes all JL, JLU, 4xe, and gladiator styles.
-OUR CLIPS WORK WITH OUR DUCK HOLDERS- NOT GUARANTEED TO WORK WITH OTHER HOLDERS-
Clips must be used on either the right or left side of the dash. Using them near the center console will result on the clip not grabbing properly resulting in the duck holder becoming loose or the clip and /or duck holder deforming due to high heat exposure.
Color tones depicted are approximate. Actual color may vary slightly
If you aren't sure just check the photo "What does my dash look like?"
Please note this listing is just for the clip that holds our Duck Holder to the dash.
Make sure you also purchase the Puzzled Duck Holder in our store.
https://arrow-3d.com/arrow-3-d-designs/p/the-puzzled-duck-holder
When this clip is ordered with our duck holder we will NOT put tape on the holder.
If you would like tape just message us that you would like it.
Thanks!
Do you have ducks on your dash that go flying every time you take a turn? Have you lost a couple because you wanted to have your doors off? Then you need the Puzzled duck holder Tritium Edition! Simple and convenient, this holder snaps together to give you more posts to put your ducks on as you need more posts.
Just like our regular duck holders but this green material is UV reactive. It has a special shimmer and vibrant green color to it especially in sunlight!
Made of durable PETG plastic that can handle the hottest dash, these holders measure 12 inches long and 1 1/4 inch wide. Holding 5 ducks neatly in place, feel free to go offroading knowing you will come home with more ducks than you left with! The posts are the perfect size for the hole in the bottom of most ducks and made of smooth tubing that are pressed into the holes of the holder. These are pre-installed to keep things easy. And now Black!
Lastly, Every holder comes with the mounting tape needed to keep them where you tell them to be. Just do a quick wipe down of the dash, peel off the film and stick!
Our mounting tape is clear so you don't see it and also REMOVABLE so you can be sure that it is mark and RESIDUE FREE.
We stand behind everything we make so if you aren't satisfied with your purchase, just let us know and we will make it right.
Color tones depicted are approximate. Actual color may vary slightly
If you would prefer to not use sticky tape for these, NO PROBLEM! Check our other listings to get our Duck Holder Clip for your Jeep body type. Simply check the photo that says "What does my dash look like?" on the listings and get the one that matches! We also have extensions to make your holder longer if you need to!
https://www.etsy.com/shop/Arrow3DDesigns
Happy Ducking!
**Contains ZERO Tritium**
Here it is, the puzzled duck holder clip. The solution to keeping your ducks in a row WITHOUT sticky tape. Designed to utilize the center post on our duck holders. (Duck Holders Sold Separately) Simply squeeze the 2 long sides together gently and clip onto the defrost vent. This design maintains full function of the defrost vents.
Once your favorite duck is on the center post the duck holder is locked into the clip. Please note that the duck holder will move slightly from time to time but it isn't going anywhere.
It is important to know that this is compatible with Jeep Wrangler defrost vents for JK models 2011 - early 2018 ONLY
-OUR CLIPS WORK WITH OUR DUCK HOLDERS- NOT GUARANTEED TO WORK WITH OTHER HOLDERS-
Clips must be used on either the right or left side of the dash. Using them near the center console will result on the clip not grabbing properly resulting in the duck holder becoming loose or the clip and /or duck holder deforming due to high heat exposure.
Color tones depicted are approximate. Actual color may vary slightly
If you aren't sure just check the photo "What does my dash look like?"
Please note this listing is just for the clip that holds our Duck Holder to the dash,
Make sure you also purchase the Puzzled Duck Holder in our store.
https://arrow-3d.com/arrow-3-d-designs/p/the-puzzled-duck-holder
When this clip is ordered with our duck holder we will NOT put tape on the holder.
If you would like tape just message us that you would like it.
Thanks!
Do you have ducks on your dash that go flying every time you take a turn? Have you lost a couple because you wanted to have your doors off? Then you need the Puzzled duck holder I’M BLUE Edition! Simple and convenient, this holder snaps together to give you more posts to put your ducks on as you need more posts.
Made of durable PETG plastic that can handle the hottest dash, these holders measure 12 inches long and 1 1/4 inch wide. Holding 5 ducks neatly in place, feel free to go offroading knowing you will come home with more ducks than you left with! The posts are the perfect size for the hole in the bottom of most ducks and made of smooth tubing that are pressed into the holes of the holder. These are pre-installed to keep things easy. And now Black!
Lastly, Every holder comes with the mounting tape needed to keep them where you tell them to be. Just do a quick wipe down of the dash, peel off the film and stick!
Our mounting tape is clear so you don't see it and also REMOVABLE so you can be sure that it is mark and RESIDUE FREE.
We stand behind everything we make so if you aren't satisfied with your purchase, just let us know and we will make it right.
Color tones depicted are approximate. Actual color may vary slightly
If you would prefer to not use sticky tape for these, NO PROBLEM! Check our other listings to get our Duck Holder Clip for your Jeep body type. Simply check the photo that says "What does my dash look like?" on the listings and get the one that matches! We also have extensions to make your holder longer if you need to!
Welcome to the blue world,
Happy Ducking!
Here it is, the puzzled duck holder clip. The solution to keeping your ducks in a row WITHOUT sticky tape. Designed to utilize the center post on our duck holders. (Duck Holders Sold Separately) Simply squeeze the 2 long sides together gently and clip onto the defrost vent. This design maintains full function of the defrost vents.
Once your favorite duck is on the center post the duck holder is locked into the clip. Please note that the duck holder will move slightly from time to time but it isn't going anywhere.
It is important to know that this is designed to fit defrost vents for Jeep TJ Models 1996 - 2006 ONLY
If you aren't sure just check the photo "What does my dash look like?"
-OUR CLIPS WORK WITH OUR DUCK HOLDERS- NOT GUARANTEED TO WORK WITH OTHER HOLDERS-
Please note this listing is just for the clip that holds our Duck Holder to the dash.
Make sure you also purchase the Puzzled Duck Holder in our store.
https://arrow-3d.com/arrow-3-d-designs/p/the-puzzled-duck-holder
When this clip is ordered with our duck holder we will NOT put tape on the holder.
If you would like tape just message us that you would like it.
Thanks!
Our Duck Holder Connector is perfect for extending your collection without taping more holders to the dash. Simply place another duck holder behind one being held with our clip and then use the connector to hold it to the first one. ---THIS LISTING IS FOR (1) CONNECTOR--- We have found that only 1 is needed but if you would like more you can. 7 colors to choose from. These connectors work with all of OUR duck holders. They will NOT work with other Etsy store products. Click the link below to get the Duck Holder that these work with. Color tones depicted are approximate. Actual color may vary slightly
-OUR CONNECTORS WORK WITH OUR DUCK HOLDERS- NOT GUARANTEED TO WORK WITH OTHER HOLDERS-
Duck Holder - https://www.etsy.com/listing/1261786364/the-puzzled-duck-holder?click_key=ff3369da825c103110de3cd846b623d430fc9ada%3A1261786364&click_sum=12c45d75&ref=shop_home_feat_1&bes=1
Never feel limited! Our Puzzled Duck Holders just got better!
Need more posts for your ducks but don't want to stick another holder to the dash?
Meet the Puzzled Extension. This extender adds 2 ducks and 5 inches to our Puzzled Duck Holders.
Each extension comes with the tape needed to quickly make your duck holders as long as you want.
To add the extension simply add it to our duck holders just like a puzzle piece.
Add as many extensions as you like! Add them to either side and then snap on the end piece.
Just remember that this listing is for just the extension and you will need to buy our Puzzled Duck Holder separately.
https://arrow-3d.com/arrow-3-d-designs/p/the-puzzled-duck-holder
Happy Ducking!
Here it is, the puzzled duck holder clip. (DUCK HOLDER SOLD SEPARATELY) The solution to keeping your ducks in a row WITHOUT sticky tape. Designed to utilize the center post on our duck holders. Simply lift and clip onto the defrost vent. This design maintains full function of the defrost vents.
Once your favorite duck is on the center post the duck holder is locked into the clip. Please note that the duck holder will move slightly from time to time but it isn't going anywhere.
It is important to know that this is designed to fit Jeep Wrangler defrost vents for JK models 2007-2010 ONLY.
-OUR CLIPS WORK WITH OUR DUCK HOLDERS- NOT GUARANTEED TO WORK WITH OTHER HOLDERS-
Please note this listing is just for the clip that holds our Duck Holder to the dash,
Color tones depicted are approximate. Actual color may vary slightly
Make sure you also purchase the Puzzled Duck Holder in our store.
https://arrow-3d.com/arrow-3-d-designs/p/the-puzzled-duck-holder
Happy Ducking!
